Mark VII V8-302 5.0L HO (1986)
ATTACHMENT I RECALL 86S13
2.
Procure the appropriate Ignition Lock Set /two keys (for "Service Only").
Note:
The appropriate Ignition Lock Set is determined by depth of cut on Number 6 tumbler station of the existing ignition key (See
Attachment I). This depth of cut can be accurately determined by using the Ford Rotunda Key Code Cutting Package Tool Part Number
011-00003. Refer to parts list below for correct letter indicator and part number.
Ignition Lock Set
Depth of cut on Number 6
(Service Only)
Tumbler Station
Letter Indicator
E6LY-11582-A
5.35 mm or No. 1 Cut
A
E6LY-11582-B
4.70 mm or No. 2 Cut
B
E6LY-11582-C
4.05 mm or No. 3 Cut
C
E6LY-11582-D
3.40 mm or No. 4 Cut
D
E6LY-11582-E
2.75 mm or No. 5 Cut
E
The selected new Ignition Lock Set will have tumbler stations 1, 2, 3, 4 and 6 pre-cut on both new keys to match the new Ignition Lock Cylinder
included in the set. The remaining tumbler stations 5, 7, 8, 9 and 10 should be cut to match the existing keys for the door locks.
3.
Using the old ignition keys, decode tumbler cut numbers 5, 7, 8, 9, and 10 using the Ford Rotunda key code cutting package tool part number
011-00003.
4.
Cut the new matching key position numbers 5, 7, 8, 9, and 10 using the designated tool.
5.
Check out new key operation in the new Ignition Lock Cylinder and the doors (both keys).
6.
Install the new Ignition Lock Cylinder in the steering column (refer to the appropriate shop manual).
7.
Reconnect battery cable.
8.
Start the car to assure proper operation of systems affected.
Note:
Make sure that both keys that have been cut per above instructions will return to the run position from start position without drag. For
future key code identification, retain both old and new key tags.
PARTS REQUIREMENTS:
As determination is required to select the proper ignition lock set, an initial supply of ignition lock cylinder sets will not be direct shipped to dealers. Do
not order recall parts from Windsor Export Supply. Order all requirements directly from Wixom using the mailing address on page No. 1 of this Bulletin.
For more urgent handling, use cable address "RECALLS - FORDEX, WIXOM, MICHIGAN". For locations having telex facilities, our telex Ford
private line code is FED and commercial telex code is 71 669777 answerback Ford DMO WIX. Our telephone number in Wixom, Michigan, is area
code (313) 344-5641. Please give the part number, description, quantity and recall number when ordering.
Part Number
Description
Class
Customs Value
E6LY-11582-A
Cylinder-Ignition Lock
RG
$8.28
(Letter Indicator A)
E6LY-11582-B
Cylinder-Ignition Lock
RG
$8.28
(Letter Indicator B)
E6LY-11582-C
Cylinder-Ignition Lock
RG
$3.28
(Letter Indicator C)
E6LY-11582-D
Cylinder-Ignition Lock
RG
$8.28
(Letter Indicator D)
E6LY-11582-E
Cylinder-Ignition Lock
RG
$8.28
(Letter Indicator E)
LABOR ALLOWANCES:
Replace Ignition lock cylinder . . . 0.5 Hrs. Insert in Box "B" on Form 1864
Administrative Allowance . . . . . . 0.1 Hrs.
The 0.1 Hour Administrative Allowance must be added to the repair time before inserting the total labor time in the correct box.
REPORTING OF COMPLETIONS:
Upon completion of the required service, return the second copy of the Form 1864 completely filled out and signed by authorized dealer personnel. Only
