lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Radio - Noise/Reception Diagnostic/Repair Procedure|Page 5834 > < Radio - Noise/Reception Diagnostic/Repair Procedure|Page 5832
Page 12
background image

SERVICE ACTION:

Technical Service Bulletin TSB 91-16-10 recommends the installation of Audio Suppression Service Kit (FOVY-18887-A) to service this concern.
Detailed instructions are provided in the Service Kit and in Figures 6 through 8.

AM Static & Weak Reception - Continental

H.

Lincoln Continental

1.

Excessive AM Static - on strong stations, poor reception with fading under bridges or overpasses.

DIAGNOSTICS:
Perform the following to verify the presence of the above concern.

a.

Tune to a weak AM radio station.

b.

Note the reception performance on this station.

c.

If condition is verified: Replace the ENTIRE antenna cable with one piece antenna cable kit (F1VY-18812-A).

2.

Poor AM Reception - on strong stations, fading, engine noise, or interference.

^

Automatic Ride Control AM Interference on Weak Stations.

^

Anti-Theft System AM Interference on Weak Stations.

Perform the following to verify the presence of one or more of the above issues.

a.

Ride Control AM Interference on Weak Stations:

^

Engine not running.

^

Tune in a weak AM radio station. (Refer to General Definition A. - AM Signal Issue
- Diagnostic Tips.)

^

Listen for a continual "buzz".

^

Turn off the Automatic Ride Control (the switch is in the trunk, on the left hand side, behind a removable panel in the trunk lining).

Radio - Noise/Reception Diagnostic/Repair Procedure|Page 5834 > < Radio - Noise/Reception Diagnostic/Repair Procedure|Page 5832