lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Radio - Noise/Reception Diagnostic/Repair Procedure|Page 5836 > < Radio - Noise/Reception Diagnostic/Repair Procedure|Page 5834
Page 14
background image

SERVICE ACTION:

Perform the following to service the noise concern.

1.

Install Fuel Pump RFI filter (F1PZ-18B925-A) as described in TSB 92-6.

2.

Replace the JBL amplifier with a repaired JBL amplifier available from the local Ford Audio Systems Authorized Distributor.

AM Static & Weak Reception - Mark VII

J.

Mark VII

1.

AM static - on strong stations, poor reception, fading under bridges and overpasses.

Perform the following checks to verify the noise cause.

1.

Tune to a weak AM radio station.

2.

Note the reception performance on this station.

3.

Continue listening to this station while performing the following steps.

4.

Note if there is any change in reception when the connection is moved, rotated, wiggled, or otherwise disturbed. If so, the connection is defective.

5.

Replace the ENTIRE antenna cable with a one-piece antenna cable kit (F1VY-18812-A).

Poor AM Reception All

K.

Poor AM Reception - fading, engine noise or interference

1.

Ignition System AM Interference

2.

Charging System AM Interference

3.

Fuel Pump Motor AM Interference

4.

Brake "Pop"

5.

Horn "Pop"

DIAGNOSTICS:
Perform the following to verify the noise concern.

1.

Ignition System AM Interference:

^

Engine running.

^

Tune in a weak AM radio station.

^

Vary the engine RPM.

^

Listen for ignition noise. The frequency varies with engine RPM.

2.

Charging System (Alternator) AM Interference:

^

Engine running.

^

Tune in a weak AM radio station.

^

Vary the engine RPM.

^

Listen for alternator whine. The frequency varies with engine RPM.

3.

Fuel Pump Motor AM Interference:

Radio - Noise/Reception Diagnostic/Repair Procedure|Page 5836 > < Radio - Noise/Reception Diagnostic/Repair Procedure|Page 5834