Mark VII V8-302 5.0L VIN F FI (1987)
faulty operation. A piece of {3-16} inch rod with an end rounded off will be helpful in guiding cups past hole.
When overhauling late model aluminum master cylinders, carefully inspect master cylinder bore for corrosion. If corroded, replace master cylinder. Do
not hone or use abrasives on the bore of these cylinders.
Removal and Installation
1.
Disconnect brake lines from master cylinder.
2.
Remove two nuts attaching master cylinder to power brake unit.
3.
Slide master cylinder off mounting studs and remove from vehicle.
4.
Reverse procedure to install.
