Mark VII V8-302 5.0L VIN F FI (1987)
Wiper Gear Box: Service and Repair
MARK VII
The wiper transmission is mounted below the cowl top panel and can be reached by raising the hood. Because the pivot shaft and transmission
assemblies are connected with unremovable plastic ball joints, the right and left pivot shafts and transmission are serviced as a unit.
1.
Perform steps 1 and 2 as outlined under ``Windshield Wiper Motor, Replace'' procedure.
2.
Raise hood, then remove left and right cowl top grilles.
3.
Remove drive arm to wiper motor crankpin retaining clip, then disconnect drive arm from crankpin.
4.
Remove pivot shaft attaching screws, then guide transmission and pivots from cowl chamber.
5.
Reverse procedure to install, ensuring wiper motor is in ``Park'' position.
