Mark VIII V8-4.6L DOHC (1996)
Stabilizer Bar: Service and Repair
1.
Turn air suspension switch OFF, then raise and support vehicle.
2.
Remove both rear wheel and tire assemblies.
3.
Disconnect emergency brake cables from stabilizer bar.
4.
Remove both stabilizer bar link upper retaining nuts and insulators.
5.
Remove links from stabilizer bar eyelets by pushing bar ends up and rotating out of the way.
6.
Remove both stabilizer bar bracket bolts.
7.
Remove brackets from T-slots in subframe.
8.
Remove rear muffler hanger retaining nuts.
9.
Remove stabilizer bar from vehicle.
10.
Reverse procedure to install.
