Mark VIII V8-4.6L DOHC (1996)
Lower Arm
12. Using a paint marker, mark the position of the rear suspension arm and bushing in relation to the rear wheel knuckle with the lower bushings in
their relaxed position.
CAUTION: Failure to mark this position will result in bushing wind-up on assembly and incorrect ride height, causing misalignment and
premature tire wear.
NOTE: When rear suspension arm bolt is removed from the rear wheel knuckle, the lower bushings will return to their relaxed positions.
Removing Hub
13. Attach Hub Remover/Replacer T81P-1104-C, Metric Hub Remover Adapter T83P-1104-BH and Hub Bearing Service Adapter T86P-1104-A1 to
hub studs as shown. Turn wrench counterclockwise until halfshaft is free in rear hub.