MKS AWD V6-3.7L (2009)
Removal and Installation
All vehicles
NOTE: The Audio Control Module (ACM) and the Front Controls Interface Module (FCIM) are serviced separately. For additional information on the
removal of the FCIM, refer to Front Controls Interface Module (FCIM) - Without Navigation See: Entertainment Systems/Entertainment System
Control Panel/Service and Repair/Front Controls Interface Module (FCIM) - Without Navigation or Front Controls Interface Module (FCIM) - With
Navigation See: Entertainment Systems/Entertainment System Control Panel/Service and Repair/Front Controls Interface Module (FCIM) - With
Navigation.
1. NOTE: Module configuration is required when a new ACM is being installed.
Upload the ACM configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in
Information Bus. See: Powertrain Management/Computers and Control Systems/Information Bus/Testing and Inspection/Programming and
Relearning
2. Remove the RH instrument panel finish applique.
3. Remove the LH and RH floor console finish mouldings.
-
Using a suitable tool such as a trim removal tool, pry upward to disengage the clips.
4. Remove the floor console upper finish panel.
-
Using a suitable tool, pry upward to disengage the clips.