MKS AWD V6-3.7L (2009)
5. Remove the 2 screws and the floor console cup holder.
6. NOTE: The shifter knob is shown removed for clarity.
Remove the 4 selector lever trim panel screws, and slide the trim panel rearward to disengage the clips.
Vehicles without navigation
7. Remove the 6 screws and the HVAC module.
Vehicles with navigation
8. Remove the 4 screws and the floor console front finish panel.
All vehicles
9. Remove the 4 screws and the ACM.
-
Disconnect the electrical connectors and the antenna lead-in cable.
10. To install, reverse the removal procedure.
-
Download the configuration information to the ACM. For additional information, refer to PMI in Information Bus. See: Powertrain
Management/Computers and Control Systems/Information Bus/Testing and Inspection/Programming and Relearning
Accessory Protocol Interface Module (APIM)
Accessory Protocol Interface Module (APIM)
