MKS AWD V6-3.7L (2009)
14. Slide the exterior front door handle reinforcement to the front of the vehicle and push inside the door.
15. Remove the 3 front door latch bolts.
-
To install, tighten to 12 Nm (106 lb-in).
16. Remove the complete latch, carrier, and handle reinforcement assembly from the door.
17. Detach the lock cylinder rod from the lock cylinder lever (if equipped).
18. Open the clip and disconnect the exterior front door handle actuating rod.
19. Unclip and remove the front door latch from the carrier.
20. To install, reverse the removal procedure.