MKS AWD V6-3.7L (2009)
Rear Door Window Motor: Service and Repair
Window Regulator Motor - Rear Door
Window Regulator Motor - Rear Door
Removal and Installation
NOTE: The window motor must be de-initialized, then initialized whenever the window motor is removed from the window regulator drum housing, a
new window regulator is installed, a new window glass is installed, a new top run is installed or for any operation in which grease or lubricants are
applied to the window regulator or glass run.
1. Remove the rear door regulator and motor assembly. For additional information, refer to Window Regulator and Motor - Rear Door See: Rear
Door Window Regulator/Service and Repair/Window Regulator and Motor - Rear Door.
2. Remove the 3 regulator motor screws and the regulator motor.
3. To install, reverse the removal procedure.
-
If installing a new window regulator motor, initialize the window regulator motor. If reinstalling the original window regulator motor,
de-initialize, then initialize the window regulator motor. For additional information, refer to Window Motor Initialization See: Windows and
Glass/Windows/Service and Repair.
