MKS AWD V6-3.7L (2009)
Trim Panel: Service and Repair
C-Pillar Trim Panel - Lower
C-Pillar Trim Panel - Lower
Removal and Installation
1. Position the rear door weatherstrip seal aside.
2. Remove rear door scuff plate. For additional information, refer to Scuff Plate Trim Panel See: Scuff Plate/Service and Repair.
3. Remove the C-pillar trim panel.
-
Pull trim towards seat to detach clips.
4. NOTICE: To avoid damage to the C-pillar trim panel, remove any retaining clips from the body and attach them to the C-pillar trim
panel before installing.
To install, reverse the removal procedure.