MKS AWD V6-3.7L (2009)
4. Connect the side air bag module electrical connector and slide the locking clip to the lock position.
5. Attach the side air bag module electrical connector and wire harness retainers under the seat as noted during removal.
Passenger seat
6. Tighten the 4 recliner-to-seat track bolts.
1. Tighten the rear outboard bolt to 48 Nm (35 lb-ft).
2. Tighten the rear inboard bolt to 48 Nm (35 lb-ft).
3. Tighten the front inboard bolt to 48 Nm (35 lb-ft).
4. Tighten the front outboard bolt to 48 Nm (35 lb-ft).
7. Connect the side air bag module electrical connector and slide the locking clip to the lock position.
