MKS AWD V6-3.7L (2009)
1. For additional information, refer to the procedures.
Parking Brake Cable - Rear
Parking Brake Cable - Rear
Removal and Installation
Both cables
1. Relieve the parking brake cable tension. For additional information, refer to Parking Brake Cable Tension Release See: Procedures.
RH cable
2. Release the cable from the cable-to-cable union.
3. Separate the RH cable from the LH at the conduit equalizer and remove the cable from the wireform bracket.
4. Remove the 3 parking brake cable bracket bolts.
-
To install, tighten to 15 Nm (133 lb-in).
5. Remove the RH wheel well bracket bolt.
-
To install, tighten to 23 Nm (17 lb-ft).
LH cable
6. Disconnect the conduit equalizer from the RH cable at the equalizer.