MKS AWD V6-3.7L (2009)
25. Remove the 2 nuts and disconnect the A/C tubes.
-
Discard the O-ring seals.
26. Remove the bolt and the A/C tube.
-
Discard the O-ring seal.
27. Disconnect the fuel supply tube from the fuel rail.
28. Disconnect the 2 engine wiring harness electrical connectors.
-
Detach the electrical connector from the LH valve cover.
29. Detach the wiring harness retainer from the engine mount bracket stud bolt.
30. Detach the wire harness retainer from the RH valve cover stud bolt.