MKS AWD V6-3.7L (2009)
31. Remove the LH cylinder block drain plug.
-
Allow coolant to drain from the cylinder block.
32. Loosen the 11 stud bolts and remove the LH valve cover.
-
Discard the gasket.
33. Loosen the bolt, the 10 stud bolts and remove the RH valve cover.
-
Discard the gasket.
34. NOTE: VCT solenoid seal removal shown, spark plug tube seal removal similar.
Inspect the VCT solenoid seals and the spark plug tube seals. Remove any damaged seals.
-
Using the VCT Spark Plug Tube Seal Remover and Handle, remove the seal(s).
35. Using the Strap Wrench, remove the crankshaft bolt and washer.
-
Discard the bolt.
