MKS AWD V6-3.7L (2009)
All vehicles
41. Connect the PSP switch electrical connector.
42. NOTICE: If the engine is repaired or replaced because of upper engine failure, typically including valve or piston damage, check the
intake manifold for metal debris. If metal debris is found, install a new intake manifold. Failure to follow these instructions can result in
engine damage.
Using new gaskets, install the upper intake manifold and the 6 bolts.
-
Tighten in the sequence shown to 10 Nm (89 lb-in).
43. Install the fuel tube bracket bolt to the upper intake manifold.
-
Tighten to 6 Nm (53 lb-in).
44. Install the upper intake manifold support bracket bolt.
-
Tighten to 10 Nm (89 lb-in).
