MKS AWD V6-3.7L (2009)
11. Remove the RH inner fender splash shield.
12. Using the Strap Wrench, remove the crankshaft bolt and washer.
-
Discard the bolt.
13. Using the 3-Jaw Puller, remove the crankshaft pulley.
14. Using the Oil Seal Remover, remove and discard the crankshaft front seal.
15. Remove the 4 Y-pipe-to-catalytic converter nuts.
-
Discard the nuts.
16. Remove the 2 Y-pipe flange nuts.
-
Detach the exhaust hanger and remove the Y-pipe.
-
Discard the gaskets and nuts.
