MKS AWD V6-3.7L (2009)
Compass: Adjustments
Compass Zone Adjustment
Compass Zone Adjustment
1. NOTE: This procedure is only applicable to vehicles without navigation. For vehicles with navigation, refer to Radio, Stereo, and Compact Disc.
Refer to the compass calibration zone map to select the correct compass zone setting for the geographic location of the vehicle.
2. With the ignition in the ON position, press and hold the 7 and 9 buttons (for approximately 5 seconds) until the compass display shows the current
zone setting (ZONE XX). Release the 7 and 9 buttons.
3. NOTE: After approximately 5 seconds, the compass display exits the zone setting mode after the 7 and 9 buttons have been released.
Before the zone setting mode turns off (within 5 seconds), momentarily press and release the 7 and 9 buttons to increase the zone increment by
one. Set the zone display number to match the vehicle geographical location on the compass calibration zone map.
4. Release the 7 and 9 buttons for 5 seconds to exit the zone setting mode.
