lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 8241 > < Initial Inspection and Diagnostic Overview|Page 8239
Page 5
background image

-

Is the resistance greater than 10,000 ohms?

Yes

GO to S6.

No

REPAIR circuit CLS34 (GY) for a short to ground. CLEAR the DTCs. REPEAT the self-test.

-------------------------------------------------
S4 CHECK THE REAR PARKING LAMPS VOLTAGE SUPPLY CIRCUIT FOR A SHORT TO VOLTAGE

-

Ignition OFF.

-

Disconnect: SJB C2280d.

-

Ignition ON.

-

Do the rear parking lamps continue to illuminate?

Yes

REPAIR circuit CLS30 (VT/WH) for a short to voltage. TEST the system for normal operation.

No

GO to S5.

-------------------------------------------------
S5 CHECK THE FRONT PARKING LAMPS VOLTAGE SUPPLY CIRCUIT FOR A SHORT TO VOLTAGE

-

Ignition OFF.

-

Disconnect: SJB C2280e.

-

Ignition ON.

-

Do the front parking lamps continue to illuminate?

Yes

REPAIR circuit CLS30 (VT/WH) for a short to voltage. TEST the system for normal operation.

No

GO to S6.

-------------------------------------------------
S6 CHECK FOR CORRECT SJB OPERATION

-

Disconnect all the SJB connectors.

-

Check for:
-

corrosion

-

damaged pins

-

pushed-out pins

-

Connect all the SJB connectors and make sure they seat correctly.

-

Operate the system and verify the concern is still present.

-

Is the concern still present?

Yes

INSTALL a new SJB. TEST the system for normal operation.

Initial Inspection and Diagnostic Overview|Page 8241 > < Initial Inspection and Diagnostic Overview|Page 8239