MKS AWD V6-3.7L (2009)
NOTE: The spare key programming switch is a programmable switch which provides the capability to enable/disable the normal customer spare key
programming procedure detailed in the Owner's Literature. It must read ENABLE if more than 2 keys need to be programmed into the Remote Function
Actuator (RFA) module using the Key Programming Using Two Programmed Keys - Intelligent Access (IA) See: Accessories and Optional
Equipment/Antitheft and Alarm Systems/Testing and Inspection/Programming and Relearning/Key Programming Using Two Programmed Keys -
Intelligent Access (IA). This programmable switch is provided as a convenience for rental company fleets or other fleet purchasers who may not want the
spare key programming procedure available to the vehicle driver.
NOTE: The spare key programming switch state can be viewed with the RFA module PID SPARE_KEY_ST.
NOTE: If the SPARE_KEY_ST PID reads ENABLE, up to 4 keys total can be programmed into the RFA module using Key Programming Using Two
Programmed Keys - Intelligent Access (IA) See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Testing and
Inspection/Programming and Relearning/Key Programming Using Two Programmed Keys - Intelligent Access (IA). If the SPARE_KEY_ST PID reads
DISABLED, the Key Programming Using Two Programmed Keys - Intelligent Access (IA) See: Accessories and Optional Equipment/Antitheft and
Alarm Systems/Testing and Inspection/Programming and Relearning/Key Programming Using Two Programmed Keys - Intelligent Access (IA)
procedure cannot function. This switch is set to ENABLE when the vehicle is built. This PID does not affect the Key Programming Using Diagnostic
Equipment - Intelligent Access (IA) See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Testing and Inspection/Programming and
Relearning/Key Programming Using Diagnostic Equipment - Intelligent Access (IA) procedure.
1. From the scan tool, enter TOOLBOX. Select BODY-SECURITY-PATS Functions and follow the on-screen instructions to ENTER SECURITY
ACCESS. For additional information, refer to Anti-Theft Security Access - Intelligent Access (IA) See: Accessories and Optional
Equipment/Antitheft and Alarm Systems/Testing and Inspection/Component Tests and General Diagnostics/Anti-Theft Security Access -
Intelligent Access (IA).
2. NOTE: The default setting of the key programming switch on delivery of all new vehicles is ENABLED, when viewing the RFA module PID
SPARE_KEY_ST.
From the scan tool menu select: "Customer Spare Key Programming Enable" (or "Customer Spare Key Programming Disable") and follow the
on-screen instructions.
-
"Customer Spare Key Programming Enable" - the spare key programming procedure is accessible.
-
"Customer Spare Key Programming Disable" - the spare key programming procedure is not accessible.
Passive Anti-Theft System (PATS) Parameter Reset - Integrated Keyhead Transmitter (IKT)
Passive Anti-Theft System (PATS) Parameter Reset - Integrated Keyhead Transmitter (IKT)
1. Insert a programmed Passive Anti-Theft System (PATS) key into the ignition lock cylinder and turn the key from the OFF position to the ON
position.
2. From the scan tool, enter TOOLBOX. Select BODY-SECURITY-PATS Functions and follow the on-screen instructions to ENTER SECURITY
ACCESS. For additional information, refer to Anti-Theft Security Access - Integrated Keyhead Transmitter (IKT) See: Accessories and Optional
Equipment/Antitheft and Alarm Systems/Testing and Inspection/Component Tests and General Diagnostics/Anti-Theft Security Access -
Integrated Keyhead Transmitter (IKT).
3. From the scan tool, select: Parameter Reset and follow the on-screen instructions.