MKS AWD V6-3.7L (2009)
16. NOTICE: When positioning the lifting table, be sure to support the rear subframe on the subframe rails. Do not lift on the rear
differential or rear control arms, damage may occur.
Position a lifting table under the subframe.
17. Remove and discard the 2 front bolts of the rear subframe.
-
To install, tighten the new bolts to 200 Nm (148 lb-ft).
18. Remove and discard the 2 rear bolts of the rear subframe.
-
To install, tighten the new bolts to 200 Nm (148 lb-ft).
19. To install, reverse removal procedure.
