MKS AWD V6-3.7L (2009)
16. Position the transmission fluid cooler thermal bypass valve and transmission fluid cooler tube assembly in place and install the thermal bypass
valve nuts.
-
Tighten to 9 Nm (80 lb-in).
17. Connect the transaxle electrical connector and install the wiring harness fastener on the main control cover stud.
18. Inspect the transmission fluid cooler tube backing ring and seal for damage and install a new backing ring or seal if necessary. Lubricate the
transmission fluid cooler tube seal with clean transmission fluid and install the backing ring and seal on the transmission fluid cooler tube.
