MKS AWD V6-3.7L (2009)
29. Route the coolant hoses to their position on the transmission fluid filler tube.
30. Position the ACL assembly in place and install the 2 ACL assembly bracket bolts.
-
Tighten to 11 Nm (97 lb-in).
31. Tighten the ACL outlet pipe clamp at the TB.
-
Tighten to 5 Nm (44 lb-in).
32. Connect the engine breather to the ACL assembly.
33. Connect the MAF sensor electrical connector.
34. Fill with clean transmission fluid to the correct level.
