MKS AWD V6-3.7L (2009)
Transmission Speed Sensor: Service and Repair
Output Shaft Speed (OSS) Sensor
6F50
Output Shaft Speed (OSS) Sensor
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the Mass Air Flow (MAF) sensor electrical connector.
3. Disconnect the engine breather from the Air Cleaner (ACL) assembly.
4. Remove the 2 ACL assembly bracket bolts.
5. Loosen the ACL outlet pipe clamp at the Throttle Body (TB) and remove the ACL and ACL outlet pipe assembly.
6. Remove the transmission fluid drain plug and allow the transmission fluid to drain.