MKS AWD V6-3.7L (2009)
4. Install the selector lever cable on the selector lever cable retainer.
-
Be sure the tabs are locked in place.
5. Connect the selector lever cable end to the selector lever.
6. Install the selector lever bezel and knob. For additional information, refer to Selector Lever Bezel See: Selector Lever Bezel and Selector Lever
Knob See: Selector Lever Knob removal and installation.
7. Check the selector lever cable adjustment. Make sure that the vehicle starts in PARK and NEUTRAL and the reverse lamps illuminate in
REVERSE. If an adjustment is necessary, refer to Selector Lever Cable Adjustment See: Adjustments.
