MKS AWD V6-3.7L (2009)
4. Remove the cup holder retaining screws and remove the cup holder.
5. Slide the selector lever bezel back and lift to access the electrical connectors.
6. Disconnect the selector lever bezel electrical connectors and remove the selector lever bezel.
Installation
1. Position the selector lever bezel on the selector lever and connect the selector lever electrical connectors.
2. Position the selector lever bezel in place.
3. Position the cup holder in place. Install the cup holder retaining bolts.
-
Tighten to 3 Nm (27 lb-in).