MKS AWD V6-3.7L (2009)
3. Position a new lower valve body separator plate and gasket on the main control valve body.
4. Position the lower valve body on the main control valve body.
5. NOTE: Install the check balls in the correct location as noted during disassembly.
Install the 7 check balls.
6. Install a new valve body separator plate and gasket.
7. NOTE: Install the different length bolts in the correct location as noted during disassembly.
Install the transfer plate assembly and hand tighten the 5 bolts.
1. 63 mm (2.48 in) bolts
2. 35 mm (1.37 in) bolts