MKS AWD V6-3.7L (2009)
22. NOTICE: Do not handle the solenoid body in the leadframe area or by the screens of the solenoid body filter or damage to the solenoid
body may occur.
NOTICE: Use care not to break the alignment tabs when installing the solenoid body filter. Damage to the transaxle will occur if the
solenoid body is not correctly aligned.
Remove the solenoid body filter assembly by pulling it straight up from the alignment tabs. Discard the filter.
23. Remove the 10 bolts, the detent spring and the main control valve body.
24. Remove the bolt and the TSS sensor.
Installation
1. Route the TSS sensor wiring harness through the cover and the transaxle case.
