MKS FWD V6-3.7L (2011)
3. Remove the 4 retainers and the underbody shield.
All vehicles
4. Remove the 2 RH lower pin-type retainers from the engine splash shield and position the shield aside.
Vehicles equipped with EPAS
5. Remove the RH and LH exhaust flexible pipes.
Vehicles equipped with Hydraulic Power Assist Steering (HPAS)
6. Remove the engine exhaust Y-pipe.
7. Remove and discard the stabilizer bar bracket-to-front subframe bolts.
Vehicles equipped with EPAS
8. NOTE: RH shown, LH similar.
Remove and discard the upper stabilizer link nuts.