MKS FWD V6-3.7L (2011)
is installed into the subframe. The Rear Drive Unit (RDU) Bushing (70 mm) Remover/Installer does not control the depth of the bushing. The
RDU bushing is fully seated when the Rear Drive Unit (RDU) Bushing (70 mm) Remover/Installer 204-616/3 and Rear Drive Unit (RDU)
Bushing (70 mm) Remover/Installer 204-616/1 fall away from the subframe, do not continue to tighten the Rear Drive Unit (RDU) Bushing
(70 mm) Remover/Installer.
Install the RDU bushing into the subframe.
4. Install the RDU.
