MKT AWD V6-3.5L Turbo (2010)
18. Remove the outboard recliner.
1. Detach the cable and cover.
-
For early build vehicles, using a 3.175 mm (0.125 in) drill, remove the rivet.
-
For late build vehicles, from behind the cable retainer, squeeze the ends together and separate.
2. Separate the cable end from the recliner.
19. Pull to release the retainers and remove the inboard recliner outer cover.
20. Separate the inboard recliner.
1. Remove the 3 screws and inboard recliner inner cover.
2. Remove the bolt and safety belt buckle.
-
To install, tighten to 50 Nm (37 lb-ft).
3. Remove the 2 recliner bolts.
-
To install, tighten to 50 Nm (37 lb-ft).
4. From behind the cable retainer, squeeze the ends together and separate.
5. Separate the cable retainer.
6. Separate the cable end from the recliner.
21. Remove the inboard recliner.
1. Detach the cable and cover.
-
For early build vehicles, using a 3.175 mm (0.125 in) drill, remove the rivet.
-
For late build vehicles, from behind the cable retainer, squeeze the ends together and separate.
2. Separate the cable end from the recliner.
