MKT AWD V6-3.5L Turbo (2010)
3. Pull the backrest foam pad away from the backrest frame.
4. Disengage and disconnect the electrical connector and pin-type retainer, remove the 3 screws, disengage from the hard back panel and remove the
backrest Thermo-Electric Device (TED).
5. To install, reverse the removal procedure.
Seat Cushion Thermo-Electric Device - Second Row
Seat Cushion Thermo-Electric Device - Second Row
Removal and Installation
NOTE: For parts identification and location, refer to Seat - Exploded View, Second Row See: Service and Repair/Rear Seat/Seat - Exploded View,
Second Row.
1. Separate the J-clips and open the cushion cover.
2. From under the seat, pull the 4 cushion cover retainers out from between the cushion frame and seat track.