MKT AWD V6-3.5L Turbo (2010)
Engines equipped with late build/replacement RH timing chain guides
6. Rotate the crankshaft clockwise and align the timing marks on the VCT assemblies as shown.
All vehicles
7. NOTE: The Camshaft Holding Tool will hold the camshafts in the Top Dead Center (TDC) position.
Install the Camshaft Holding Tool onto the flats of the LH camshafts.
8. NOTE: The Camshaft Holding Tool will hold the camshafts in the TDC position.
Install the Camshaft Holding Tool onto the flats of the RH camshafts.
9. Remove the 3 bolts and the RH VCT housing.
