lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3411 > < Initial Inspection and Diagnostic Overview|Page 3409
Page 45
background image

-

Measure the resistance between the ILCM C3256-18, circuit VDB07 (VT/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG),
harness side.

-

Are the resistances less than 5 ohms?

Yes

CONNECT the negative battery cable. GO to Q4. 

No

REPAIR the circuit in question. CONNECT the negative battery cable. CLEAR the DTCs. REPEAT the network test with the scan tool.

Initial Inspection and Diagnostic Overview|Page 3411 > < Initial Inspection and Diagnostic Overview|Page 3409