MKT AWD V6-3.5L Turbo (2010)
Engine Control Module: Customer Interest
Engine Controls - DTC P0096 After Warm Engine Restart
TSB 09-23-8
11/30/09
DTC P0096 - INTAKE AIR TEMPERATURE: IAT
SENSOR 2 CIRCUIT/RANGE PERFORMANCE - BANK
1 - BUILT ON OR BEFORE 10/14/2009
FORD:
2010 Taurus, Flex
LINCOLN:
2010 MKS, MKT
ISSUE
Some 2010 Taurus, MKS, MKT and Flex equipped with Gasoline Turbocharged Direct Injection (GIDI) engines and built on or before 10/14/2009 may
exhibit diagnostic trouble code (DTC) P0096 intake air temperature: (IAT) sensor 2 circuit/range performance on bank 1. This may occur when the
engine is at operating temperature and the vehicle is shut off and then restarted within five seconds.
ACTION
Reprogram the powertrain control module (PCM) to the latest calibration using IDS release 63.12 and higher or 64.01 and higher. This new calibration is
not included in the VCM 2009.9 DVD. Calibration files may also be obtained at the website.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
092308A
2010 Flex, MKS, MKT,
0.3 Hr.
Taurus: Check DTCs And
Reprogram The PCM (Do
Not Use With Any Other
Labor Operations)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
RECALEM
04
Disclaimer
