MKT FWD V6-3.7L (2010)
Antitheft Antenna: Service and Repair
Anti-Theft - Passive Anti-Theft System (PATS) - Passive Start Antenna - Front
Passive Start Antenna - Front
Removal and Installation
1. Remove the floor console. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.
2. Pull the red lock tab outward and disconnect the front passive start antenna electrical connector.
3. Remove the 2 screws and the front passive start antenna.
4. To install, reverse the removal procedure.
