MKT FWD V6-3.7L (2010)
Trim Panel: Service and Repair
B-Pillar Trim Panel
B-Pillar Trim Panel
Removal and Installation
Lower trim panel
1. Remove the instrument panel side finish panel.
-
Pull outward to release the retaining clips.
2. Remove the lower A-pillar trim panel.
-
Pull outward to release the retaining clips.
3. NOTICE: When removing scuff plate trim panels with the Lincoln ambient lighting, care must be taken not to damage the aluminum
insert.
Remove the front door scuff plate.
-
Using a flat trim tool, lift upward on the scuff plate to release the clips.
-
Disconnect the ambient light electrical connector.
4. Remove the rear door scuff plate.
-
Using a flat trim tool, lift upward on the scuff plate to release clips.
5. Remove the lower B-pillar trim panel.
-
Pull outward on the trim panel to release the clips.
Upper trim panel
6. NOTE: Inspect the safety belt D-ring cover for damage. If the safety belt D-ring cover does not remain in place, install a new cover.
Remove the safety belt D-ring cover.
