MKT FWD V6-3.7L (2010)
4. Pivot the screwdriver handle toward the front of the seat, releasing the latch.
Seat with inoperable stow motor
5. NOTE: LH shown, RH similar.
Pry to release the clips and remove the backrest latch outer cover.
6. NOTICE: Make sure the wire harness is not damaged while positioning the release lever or the power-fold seat will not operate correctly.
NOTE: LH shown, RH similar.
Position the pivot release lever down and pivot the seat away from the floor striker.
-
When installing, make sure the pivot lever is engaged.
