MKT FWD V6-3.7L (2010)
Seat Heater Control Module: Service and Repair
Passenger Climate - Controlled Seat Module (PCSM-2)
Passenger Climate - Controlled Seat Module (PCSM-2)
Removal and Installation
NOTE: For parts identification and location, refer to Seat - Exploded View, Second Row See: Service and Repair/Rear Seat/Seat - Exploded View,
Second Row.
1. Separate the J-clips and open the cushion cover.
2. Remove the Dual Climate Controlled Seat Module (DCSM) in the following sequence.
-
Pull up and release the 2 locking wedges.
-
Disconnect the electrical connectors.
-
Remove the 2 screws.
-
Remove the DCSM.
3. To install, reverse the removal procedure.