MKT FWD V6-3.7L (2010)
RH camshafts
129. Compress the RH secondary timing chain tensioner and install a suitable lockpin to retain the tensioner in the collapsed position.
130. NOTE: The VCT bolt and the exhaust camshaft bolt must be discarded and new ones installed. However, the exhaust camshaft washer is
reusable.
Remove and discard the RH VCT assembly bolt and the RH exhaust camshaft sprocket bolt.
-
Remove the RH VCT assembly, secondary timing chain and the RH exhaust camshaft sprocket as an assembly.
131. Remove the Camshaft Holding Tool from the RH camshafts.
132. NOTICE: The camshafts must remain in the neutral position during removal or engine damage may occur.
Rotate the RH camshafts counterclockwise to the neutral position.
