MKT FWD V6-3.7L (2010)
126. Install the accessory drive belt and the power steering belt. For additional information, refer to Drive Belts, Mounts, Brackets and Accessories.
127. Install the LF wheel and tire. For additional information, refer to Wheels and Tires.
128. Install the underbody shield and install the 4 retainers.
129. Connect the ground cable to the negative battery terminal and install the nut.
-
Tighten to 6 Nm (53 lb-in).
130. Connect the power feed wire to the positive battery terminal and install the nut.
-
Tighten to 6 Nm (53 lb-in).
131. Connect the engine wiring harness electrical connector.
132. Install the battery tray. For additional information, refer to Battery.
133. Install the engine Air Cleaner (ACL) and ACL outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.
134. Install the strut tower brace and the 4 nuts.
-
Tighten to 35 Nm (26 lb-ft).
