MKT FWD V6-3.7L (2010)
Air Door Actuator / Motor: Service and Repair
Mode Door Actuator - Defrost/Panel/Floor Door
Mode Door Actuator - Defrost/Panel/Floor Door
Removal and Installation
1. Remove the instrument cluster. For additional information, refer to Instrument Panel, Gauges and Warning Indicators.
2. Remove the steering column. For additional information, refer to Steering Column.
3. NOTICE: Do not press the brake pedal when removing or installing the speed control deactivator switch, as the switch will be damaged.
Remove the speed control deactivator switch.
-
Rotate the speed control deactivator switch counterclockwise 45 degrees and remove the deactivator switch.
4. Detach the 3 wire harness-to-brake pedal bracket pin-type retainers from the brake pedal bracket.
5. Remove the 3 defrost/panel/floor mode door actuator screws.
6. Disconnect the defrost/panel/floor mode door actuator electrical connector.
7. Remove the defrost/panel/floor mode door actuator.
8. To install, reverse the removal procedure.