lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3299 > < Initial Inspection and Diagnostic Overview|Page 3297
Page 73
background image

-

Is the resistance less than 5 ohms?

Yes

GO to AB3. 

No

REPAIR the circuit. CLEAR the DTCs. REPEAT the network test with the scan tool.

-------------------------------------------------
AB3 CHECK THE MS-CAN CIRCUITS BETWEEN THE RHVAC MODULE AND THE DLC FOR AN OPEN

 

-

Measure the resistance between the RHVAC module C3198-1, circuit VDB06 (GY/OG), harness side and the DLC C251-3, circuit VDB06
(GY/OG), harness side.

-

Measure the resistance between the RHVAC module C3198-2, circuit VDB07 (VT/OG), harness side and the DLC C251-11, circuit VDB07
(VT/OG), harness side.

-

Are the resistances less than 5 ohms?

Yes

GO to AB4. 

No

REPAIR the circuit in question. CLEAR the DTCs. REPEAT the network test with the scan tool.

-------------------------------------------------
AB4 CHECK FOR CORRECT RHVAC MODULE OPERATION

 

Initial Inspection and Diagnostic Overview|Page 3299 > < Initial Inspection and Diagnostic Overview|Page 3297