lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3355 > < Initial Inspection and Diagnostic Overview|Page 3353
Page 129
background image

-

Is the resistance less than 5 ohms?

Yes

GO to AH19. 

No

CONNECT the negative battery cable. GO to AH72.

-------------------------------------------------
AH19 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE IPC DISCONNECTED

 

-

Disconnect: Instrument Panel Cluster (IPC) C220 .

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

If the vehicle is equipped with an Interior Lighting Control Module (ILCM), GO to AH20. 

If the vehicle is not equipped with an ILCM, GO to AH21. 

No

CONNECT the negative battery cable. GO to AH73.

-------------------------------------------------
AH20 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE ILCM DISCONNECTED

 

-

Disconnect: ILCM C3256 .

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to AH21. 

No

Initial Inspection and Diagnostic Overview|Page 3355 > < Initial Inspection and Diagnostic Overview|Page 3353