MKT FWD V6-3.7L (2010)
4. Disconnect the selector lever cable end from the selector lever ballstud.
5. Depress the 2 tabs and remove the selector lever cable from the selector lever.
6. Pull the LH center console lower trim panel away from the center console to release the retaining clip. Position aside the LH center console lower
trim panel to access the selector lever cable.
7. Pull the carpet back away from the floor and center console far enough to access the selector lever cable grommet nuts and the retainer.
8. Disconnect the selector lever cable retainer from the floor and position the cable aside.
