MKT FWD V6-3.7L (2010)
14. Unlock the selector lever cable adjuster by sliding the locking tab over.
15. Slide the cable end forward or backward to align it with the manual control lever.
16. With the adjuster locking tab released, connect the selector lever cable end to the manual control lever.
17. Slide the release tab back to lock the adjuster.
18. Install the main control cover.
-
For vehicles equipped with a 3.7L engine, refer to Main Control Cover - 3.7L See: Fluid Pan/Service and Repair.
-
For vehicles equipped with a 3.5L GTDI engine, refer to Main Control Cover - 3.5L GTDI See: Fluid Pan/Service and Repair.
