MKT FWD V6-3.7L (2010)
5. Connect the TR sensor electrical connector.
1. Connect the electrical connector.
2. Slide the locking tab over.
6. Connect the TSS sensor electrical connector.
7. Wipe the surface of the existing solenoid body strategy tag on top of the transaxle case clean and install the new solenoid body strategy tag
(supplied with the solenoid body service kit) over it.
8. Install the main control cover.
-
For vehicles equipped with a 3.7L engine, refer to Main Control Cover - 3.7L See: Automatic Transmission/Transaxle/Fluid Pan/Service and
Repair.
-
For vehicles equipped with a 3.5L GTDI engine, refer to Main Control Cover - 3.5L GTDI See: Automatic Transmission/Transaxle/Fluid
Pan/Service and Repair.
9. Download a new solenoid body strategy to the PCM. For additional information, refer to Solenoid Body Strategy See: Testing and
Inspection/Initial Inspection and Diagnostic Overview/Solenoid Body Strategy.
