MKT FWD V6-3.7L (2010)
Window Shade: Service and Repair
Sunshade Track
Sunshade Track
Sunshade track front
NOTE: Refer to the exploded view in Sunshade - Fixed Glass Roof See: Sunshade - Fixed Glass Roof for additional information.
1. Lower the headliner. For additional information, refer to Headliner See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair.
2. Remove the front sunshade assembly. For additional information, refer to Sunshade - Fixed Glass Roof See: Sunshade - Fixed Glass Roof.
3. Remove the 3 LH and 3 RH sunshade track screws.
4. Remove the LH and RH sunshade tracks.
-
Slide the tracks off the sunshade adjusting cables.
Sunshade track rear
5. Remove the rear sunshade assembly. For additional information, refer to Sunshade - Fixed Glass Roof See: Sunshade - Fixed Glass Roof.
6. Remove the sunshade motor. For additional information, refer to Sunshade Motor See: Window Shade Motor/Service and Repair/Sunshade Motor
.
7. Remove the 2 rear sunshade stop screws.
8. Remove the sunshade adjusting cables.
-
Pull the cables out of the LH and RH rear track.
9. Remove the 4 LH and 4 RH rear sunshade track screws and remove the tracks.
Sunshade track front and rear
10. To install, reverse the removal procedure.
-
Make sure that the drive tubes are completely seated into the sunshade tracks.
-
Snug the sunshade tracks and cycle the sunshades. Make sure that the sunshades do not bind or wrinkle and then tighten the track screws.