MKT FWD V6-3.7L (2010)
Wiper Arm: Service and Repair
Wiper Pivot Arm - Front
Wiper Pivot Arm - Front
Removal and Installation
1. Remove the wiper pivot arm nut cover.
2. NOTE: A suitable 2 jaw puller may be necessary to remove the wiper pivot arm.
Remove the nut and the wiper pivot arm.
-
To install, tighten to 25 Nm (18 lb-ft).
3. To install, reverse the removal procedure.
-
Adjust the wiper pivot arms. For additional information, refer to Wiper Blade and Pivot Arm Adjustment - Windshield See: Adjustments.